GC-FSD series wood crusher has a wide application in pulverizing wooden materials, such as: trunk, tree branches, cotton stalks, corn stalks, and straw, etc. These biomass materials will be shattered into small particles with diameters between 3mm and 5mm, which is the proper size for pelletizing and briquetting.
GC-FSD Wood Crusher
GC-FSD wood crusher is an integration of double crushing and screening. During the crushing, the rotor produces high-speed airflow. As the blade rotates, the material will be accelerated in the gas stream. Under repeated crushing, the crushing rate can be largely accelerated. Besides, thanks to its small size and high efficiency, this wood crusher is an ideal choice for homemade briquette press.
|
Model No. |
GC-FSD400 |
GC-FSD600 |
GC-FSD800 |
GC-FSD1000 |
|
Cutting diameter (mm) |
400 |
600 |
800 |
950 |
|
No. of cutting blades |
4 |
4 |
6 |
4-6 |
|
Length of cutting blades(mm) |
95 |
200 |
240 |
300 |
|
Feeding Diameter(mm) |
150*150 |
200*230 |
250*300 |
400*500 |
|
Main shaft speed (r/min) |
2600 |
2600 |
3500 |
2000 |
|
Power (kW) |
11 |
15 |
30 |
45 |
|
Capacity(kg/h) |
300-500 |
600-700 |
800-1200 |
1800-2000 |
|
Dimension (meter) |
1.1*0.7*0.95 |
1.5*0.8*1.2 |
2.1*1.1*1.4 |
2.1*1.2*1.6 |
|
Weight (kg) |
350 |
400 |
1000 |
|
GC-FSD-D Wood Crusher (Diesel Engine)
GC-FSD wood crusher also has the diesel engine type, which is the GC-FSD-D wood crusher.
|
Model GC-FSD-D |
Grinder Crusher with Diesel Engine |
|
(For raw wood moisture max. 40%) |
|
|
Capacity (kg/h) |
300-500 |
|
Diameter of Feeding Material |
Not more than 150mm |
|
Size of Crushed Material |
Max. Ø5×5mm |
|
Diesel Engine |
15/18HP |
|
Gross/Net Weight |
600/550kg |
As a professional manufacturer and supplier of wood crushers, our crushers have been exported to many countries. And the followings are things that you should note when buying a wood crusher:
1. Turn on the wood crusher and check whether the rotating direction is right or not.
2. When the cutters are installed, the knife-edge should extend the cutterhead by 2-4mm. Then tighten the bolts, and stretch the cutter to the same length.
3. The worn pressure bolts should be replaced immediately to avoid slip.
If you are interested in our wood crushers or want to know more information about them please do not hesitate to contact us! All of our machines can be customized according to your specific requirements.